Trenchless Technology Center
Louisiana Tech University

Water Environment Research Foundation
http://www.werf.org
 
SEWER LATERAL INSPECTION

Sewer laterals are being inspected to identify :
  • Existence of leaks, e.g. cracks, joints, etc. that are either actively leaking at the time of inspection or with stains that indicate leaking at other times, and sometimes to determine severity of these leaks (i.e. to quantify them for certain rainfall or groundwater conditions)
  • Various connections to the pipe such as area drains, etc. that are likely sources of inflow
  • Structural defects such as cracks or holes in pipes that have led or could lead to the collapse of pipes
  • Any defects at connections in the pipes that are often a weak link
  • Existence of roots in pipes and the extent of their growth in them
  • Corrosion and mineral buildup that have reduced the hydraulic capacity of pipes in time
  • Bends in the pipe (location and degree)
  • Any existing sags or misaligned joints that can promote buildup of material in the pipes
  • Any change in pipe material along the length of lateral as well as change in pipe diameter
The lateral inspection methods shown below are included in our database. Click on the link to see details.
METHODS:
Smoke Testing
Dyed Water Testing
Lateral CCTV Inspection
  Push-Type Lateral CCTV
  Self-Propelled Lateral CCTV
Mainline CCTV
Pressure Testing
  Air Pressure Test
  Water Exfiltration Test
Electro Scanning
Pressure Testing

Pressure testing is performed to check the leak-tightness of the pipes. A section of the sewer (typically including the lateral and the connection with the mainline) is isolated using plugs, filled with either air or water and pressurized. The drop in air pressure or water level is observed for a given period of time. The pipe is considered leak tight when the pressure or water level stays above a pre-determined threshold.

CONTACT US
Copy Right: TTC Louisiana Tech University
Ruston, LA